InteliLiteNT AMF25
InteliLiteNT AMF25
Standby System (with Remote Monitoring via the Internet)
Auto Mains Failure (AMF) systems with remote monitoring capabilities are typically used as a standby power source, operating where grid power may be unreliable, or where mains power cannot afford to be lost.
Situation
Auto Mains Failure (AMF) systems with remote monitoring capabilities are typically used as a standby power source, operating where grid power may be unreliable, or where mains power cannot afford to be lost. The service provider can control and monitor the gen-set remotely from any location with accessible internet using the wide range of communication capabilities (when the appropriate plug-in module is attached to the ComAp controllers), saving both time and money for maintenance.
Solution
InteliLite AMF25 continuously monitors the mains supply, and in the event of a failure, automatically starts the engine then switches the load to a standby gen-set. With the addition of a 4G/GPS plug-in module, the service provider can remotely monitor their standby gen-sets over the internet. ComAp’s LiteEdit application can be used to monitor and control a single gen-set, while WebSupervisor can be used for total fleet management.
1. InteliLite AMF25 continuously monitors the mains supply, and in the event of a failure, will automatically switch the load to a standby genset.
2. The generator is protected by a built in over/under voltage and frequency protections as well as IDMT overcurrent protection.
3. CAN J1939 Bus allows for smooth communication between the controller and engine management unit.
4. CM-4G-GPS plug-in module for 4G, 3G or 2G connection to the internet and GPS positioning.
Standby System (with Remote Monitoring via the Internet)
Auto Mains Failure (AMF) systems with remote monitoring capabilities are typically used as a standby power source, operating where grid power may be unreliable, or where mains power cannot afford to be lost.
Situation
Auto Mains Failure (AMF) systems with remote monitoring capabilities are typically used as a standby power source, operating where grid power may be unreliable, or where mains power cannot afford to be lost. The service provider can control and monitor the gen-set remotely from any location with accessible internet using the wide range of communication capabilities (when the appropriate plug-in module is attached to the ComAp controllers), saving both time and money for maintenance.
Solution
InteliLite AMF25 continuously monitors the mains supply, and in the event of a failure, automatically starts the engine then switches the load to a standby gen-set. With the addition of a 4G/GPS plug-in module, the service provider can remotely monitor their standby gen-sets over the internet. ComAp’s LiteEdit application can be used to monitor and control a single gen-set, while WebSupervisor can be used for total fleet management.
1. InteliLite AMF25 continuously monitors the mains supply, and in the event of a failure, will automatically switch the load to a standby genset.
2. The generator is protected by a built in over/under voltage and frequency protections as well as IDMT overcurrent protection.
3. CAN J1939 Bus allows for smooth communication between the controller and engine management unit.
4. CM-4G-GPS plug-in module for 4G, 3G or 2G connection to the internet and GPS positioning.
5. The gen-set can be controlled and monitored via any laptop or portable device using WebSupervisor. iOS/Android app available to download for free.
